Tire Sizes: Up to 4.75" (120 mm) front, 6" (152 mm) rear
Wheelbase: Up to 65" (165 cm)
Vehicle Requirements
Requires a standard 2” hitch receiver and sufficient tongue weight capacity for your bike and rack (use our calculator to confirm).
m3 Motorcycle Hitch Carrier
$599.00
m3 Motorcycle Carrier Overview
Our legacy motorcycle, scooter and dirt bike hitch carrier – designed & assembled in Texas. Weighing only 59 lbs. and hauling motorcycles up to 500 lbs., it offers impressive structural efficiency with adjustable parts; a two piece/locking front wheel chock, an angled steel tire track for standard size tires, a broad front tie down arm with a patented design, an elongated loading ramp and a stabilizing single bolt connection to vehicles. Trust our track record and enjoy the ride with the MotoTote m3.
Technology & Features
HitchLift Receiver Tube
Innovative 2" receiver tube counteracts common vehicle hitch droop with a slight upward bend, ensuring that the rack is angled correctly from the back of the vehicle. Provides additional ground clearance, attachment of ramp and distance from vehicle adjustability.
MTX Platform
Heavy-duty steel main support connects to 2" receivers, hauls up to 500 lbs. (227 kgs.), supports track, chock, orientation, and distance from vehicle adjustability, alongside the attachment of innovative components.
StableStop Chock
Adjustable two-piece front tire mount locks tires up to 4.75" (120 mm) wide into track, maximizes support, and helps balance the bike upright while securing tie-downs.
Angled Steel Track
Angled track wedges rear tire sizes up to 6" (152 mm) wide into track and accommodates up to 65" (165 cm) wheelbases.
BroadPull Arm
Patented front tie-down arm provides main support for motorcycle stabilization. Rear tie down arm prevents rear tire from bouncing out of track.
EasyLoad Ramp
A long webbed steel ramp increases tire's traction and eases the loading angle. Ramp hooks into tire track and will not disengage during loading.
ZeroWobble+ Hitch Mount
Upgraded single-bolt hitch mount installs quickly, requires fewer tools and eliminates rack movement in transport.
Track Distance from Vehicle: Adjustable at 16”, 18” or 20”
Total Length: 72.5” - 78.5” (184 cm - 199 cm)
Loading Ramp Length: 56” L (142 cm.)
Front Tie Down Width: 29” (73.5 cm)
Front Wheel Chock Width: 4.75” (120 mm.)
Loading Ramp Slope: v17 ° (On Average)
Weights
Weight Capacity: 500 lbs. (227 kgs.)
Carrier Weight: 59 lbs. (27 kgs.)
Materials
Material: Powder Coated Steel
Finish: Textured Black Powder Coating
Hardware: Black Zinc Coated
Assembly
Straightforward by design. Assembly usually takes 30–60 minutes, depending on proficiency, and requires only a few basic tools. Click here for step-by-step instructions.
"I purchased an offshore model first thinking they would all be the same, but it was a bad assumption on my part. The MotoTote carrier is substantially better. "
M3 rack arrived promptly but showed up with several nicks in the powder coating. Packaging may need to be improved. It is very sturdy and a well made rack. It is extremely stable. Straps were very good quality.
R
Richard Ahrendt
I am very satisfied with m3. It went together easily and I feel my bike is far more secure than with the other bike haulers I have used.
R
Rob
Seems solid and well built. Wobbles a bit and powder coat started wearing off on first use. All in all I think for the price the Vevor my friends bought (which is not built as heavy) performs just as well for a fraction of the price. To expensive for what it is.
D
David Real
Great quality
I am glad that I purchased the MotoTote instead of the cheaper competitor. There are some brilliant design features that make it unique and allow it to be pretty light weight and strong. The "zero wobble bolt" is really unique and works. Customer service is great and responsive too.
S
Steve E.
Solid carrier for a Husky 501
Have used this to transport a Husky 501 for a few trips all over California on my Tacoma. Overall solid option. I've had to retighten key bolts a few times and my one complaint is the thin powder coating in certain areas that immediately rusted in coastal environments. But the carrier is solid and feels sturdy.
C
Chris Bauer
M3 Motorcycle Hitch Carrier - Review
Excellent carrier. Well made and strong as an ox. Use it for my Beta 300 for solo trail riding and our Honda ADV scooter for camping with the motorhome. Would recommend! I also installed the accessory lighting kit. Well worth the purchase.
K
Kekoa
M3
M3 came in packaged well with no issues. Easy assembly and it's pretty dam sturdy. Took it to the OHV spot which includes a pretty rough gravel/rocky dirt road and the carrier held up strong. On the high-ways and paved roads, the bike does not move one bit. Definitely worth spending the extra money for a stronger carrier compared other brands.
G
Gary
M3 Love It !
Easy to assemble, works great.. nicely designed.. paint and welding done right !
I’m not sold on the “zero wobble” bolt, I’ve only used this a couple times now and the threads on the bolt appear to be a bit worn. I don’t think it will last ..
I’d give this an absolute 100% if they’d supply some upgraded hardware not some cheap stuff..
I also bough the ratcheting tie downs and tire sling.
Awesome stuff..!
b
brandin lazenby
Can't get shipped!!
Horrible experience! Can't get shipped and not great communication.
Hi Brandin, we're sorry to hear about the shipping issues and communication frustration. We have shipped a replacement for the lost package. Thank you for your feedback.
Choosing a selection results in a full page refresh.